General Characteristics - Cembre RHU450 Notice D'utilisation Et D'entretien

1. GENERAL CHARACTERISTICS

– Application range: suitable for installing compression connectors for conductors up
– Crimping force: ..........................................................................................................450 kN
– Max. operating pressure: ......................................................................................700 bar
– Dimensions: length ..................................................................................................260 mm
width ...................................................................................................120 mm
– Weight: ..........................................................................................................................10,3 kg
2. INSTRUCTIONS FOR USE
2.1) Setting
The head is equipped with a "self-lock" quick male coupler and can be connected to a Cembre
hydraulic pump developing 700 bar pressure.
The adapter AU450-130D is available as an optional extra enabling the head to utilise the semi-cir-
cular slotted dies common to most 130 kN tools.
2.2) Die insertion
Dedicated dies
– Select the appropriate die set for the connector to be crimped.
– Extract the die locating pin (04) from the head.
– First, insert the lower die (38) into the fork (01).
– Then fi t the upper die (37) into the head and insert the die locating pin (04).
– To remove the dies from the head, extract the die locating pin (04) and slide out the dies.
Semi-circular dies
– Select the appropriate die set for the connector to be crimped.
– Extract the die locating pin (04) from the head.
– Insert the lower part (35) of adapter AU450-130D into the fork (01).
– Insert the upper part (39) of the adapter AU450-130D into the head and lock it, inserting com-
pletely the die stop pin (04) through the adapter.
– Press pin (32) on lower part of adapter (35), AU450-130D and insert one half of the die set (36)
until secured by locking pin (34).
3
HYDRAULIC PRESSHEAD
to ..............................................................................................1000 mm
(Ref. to Fig. 1 and 2)
RHU450
ENGLISH
2 (2000 MCM)
(50.5 sh ton)
(10,000 psi)
(10.2 in.)
(4.7 in.)
(22.7 lbs)