JVC DLA-RS65 Manuel D'instructions page 56

3
Adjustments and settings in the menu (continued)
[1-2] Advanced
Use this function to set video image contours, overall sharpness, noise
reduction mode and video afterimage. You can also create your preferred
gamma and color quality.
Use the UP and DOWN keys to select items. Press the [BACK] key to return
to the previous screen.
Items
Sharpness
NR
RNR
MNR
BNR
X7
Color Space
45
Standard
Wide 1
Wide 2
Custom Gamma
Color Management
User Name Edit
User 1
User 2
User 3
User 4
User 5
Input cursor
Select cursor
Clear
All Clear
OK
56
Operation
Explanation, operation, precautions, settings
You can set the sharpness and detail enhance to "[1-2-1] Sharpness" of the submenu
Reduces the noise of the video images. Please adjust to your preference.
Adjusts the intensity of random noise elimination of the image.
Settings: (Low) 0 to16 (strong)
Adjusts the intensity of mosquito noise elimination of the video images.
(*) It is not possible to set it when the "Picture Mode" is set to "3D".
Moreover, it is not possible to set it when there is an input of HD input signals.
Settings: (Low) 0 to16 (strong)
Reduces the block noise of the video images.
(*) It is not possible to set it when the "Picture Mode" is set to "3D"
Moreover, it is not possible to set it when there is an input of HD input signals.
Settings: On, Off
You can switch the color space display of the projector output.
Settings: Standard, Wide 1, Wide 2
Equivalent to the HDTV color space
Equivalent to the color space of the DCI standard
A color space that is broader than Wide1
It is possible to set the gamma curve and save it. Please adjust to your preference.
To "[1-2-2] Custom Gamma" of the submenu
It is possible to set the color of the screen to the preferred color and save it.
To "[1-2-3] Color Management" of the submenu.
You can edit the "Picture Mode" User Name.
(*) No. of characters is limited to 10
(*) You can use capital and small alphabet letters, numbers and symbols.
Select the user name you want to edit.
Press the [OK] key on the main unit or on the remote control to confirm and enter the edit
mode.
(*) Press the [BACK] key on the main unit or on the remote control to exit edit mode.
Doing so will delete the content of your modifications.
This displays the place where you will enter the characters. The cursor will move
automatically; it cannot be moved to the left or right.
Move the cursor using the [UP], [DOWN], [LEFT], and [RIGHT] keys on the main unit or
on the remote control.
Move to the letter you want to enter and press the [OK] key on the main unit or on the
remote control to set the letter at the input cursor position in the NAME field.
Use this function to delete a character. Move the select cursor to the desired location and
press the [OK] key on the main unit or on the remote control. This will delete the character
to the left of the input cursor in the Name field.
Use this function to delete all characters. Move the select cursor to the desired location
and press the [OK] key on the main unit or on the remote control. A delete confirmation
message will appear.
Use this function to set your name. Move the select cursor to the desired location
and press the [OK] key on the main unit or on the remote control. A save confirmation
message will appear.
Advanced
>
Sharpness
NR
Custom Gamma
Color Management
Off
User Name Edit
Clear Motion Drive
Off
CMD Demo
MPC Level 3
Lens Aperture
0
Lamp Power
Normal
[0]
[0]
[Off]
[Standard]
65 55