Sony HT-X9000F Manuel D'instructions page 47

[Standby Through]
This function is available when you set
[Control for HDMI] to [On].
[Auto]
: Signals are output from the
HDMI OUT (ARC)
system's
the TV is turned on while the system is
not turned on. The system standby
power consumption can be reduced
more than when set to [
On
[ ]: Signals are always output from the
HDMI OUT (ARC)
system's
the system is not turned on. If you
connect a TV other than those
manufactured by Sony, we recommend
that you select this setting.
Off
[ ]: Signals are not output from the
HDMI OUT (ARC)
system's
the system is not turned on. Turn on the
system to enjoy on the TV content of a
device connected to the system. The
system standby power consumption
can be reduced more than when set to
On
[ ].
[TV Audio Input Mode]
Set this function when the system is
connected to a TV's HDMI IN jack that is
compatible with Audio Return Channel.
The Audio Return Channel function is
available when you set [Control for
HDMI] to [On].
[Auto]: You can listen to TV sound from
the speakers of the system.
[Optical]: Use this setting when an
optical digital cable is connected.
[HDMI Signal Format]
You can select the HDMI signal format
for the input signal. For details, see
"Setting the HDMI Signal Format to
Watch 4K Video Content" (page 22).
jack when
On
].
jack when
jack when
[Bluetooth Settings]
[Bluetooth Mode]
You can enjoy content from a
BLUETOOTH device by using this
system.
[Receiver]: This system is in receiver
mode, which enables it to receive and
output audio from the BLUETOOTH
device.
[Off]: The BLUETOOTH function is turned
off and you cannot select the [Bluetooth
Audio] input.
[Bluetooth Standby]
You can set the [Bluetooth Standby] so
that the system can be turned on by a
BLUETOOTH device even when the
system is in standby mode. This
function is only available when you set
[Bluetooth Mode] to [Receiver].
[On]: The system turns on automatically
when you request a BLUETOOTH
connection from a paired BLUETOOTH
device.
[Off]: Off
[Bluetooth Codec - AAC]
This function is only available when you
set [Bluetooth Mode] to [Receiver].
[On]: Enables AAC codec.
[Off]: Disables AAC codec.
Note
You can enjoy high-quality sound if AAC is
enabled and your device supports AAC.
[System Settings]
[OSD Language]
You can select the language you want
for the system on-screen display.
[IR-Repeater]
[On]: Remote signals for the TV are sent
from the rear of the main unit.
[Off]: Turns off the function.
47
US