Connecting The Power Cable; Turning On And Off The Power - Yamaha PIANOCRAFT CRX-E320 Mode D'emploi

CONNECTING THE POWER CABLE

MAINS
AUX TUNER
AM
FM ANT
GND ANT
75Ω UNBAL.
OUT
L
R
STANDBY/ON ( )
14
En
Connecting the power cable
To an AC wall outlet

Turning on and off the power

STANDBY/ON OPEN/CLOSE
1 2 3 4
5 6 7 8
INDEX DIMMER
9 0
FREQ/TEXT
PROG A B
REPEAT
PTY SEEK
After you made all connections, connect the power cables
of this unit, subwoofer, and external component to an AC
wall outlet respectively.
•
Press STANDBY/ON to turn on this unit.
•
Press STANDBY/ON again to set this unit to
the standby mode.
All display turns off and this unit turns into the eco
mode.
y
• You can also turn on/off this unit by pressing STANDBY/ON
on the front panel.
• During the standby mode, the power consumption is reduced.
• If you press MODE on the front panel during the standby
mode, you can display the clock during the standby mode.
• The memory back-up circuit prevents the stored data from
being lost even if this unit is in the standby mode. However, the
stored data will be lost if the power cable is disconnected from
the AC wall outlet or if the power supply is cut off for more
than one week.