Safety Instructions; Basic Information Concerning Safety; Misuse - Hilti POT 10 Mode D'emploi

Laser plummet
Accuracy
Power
Laser class
Display
Type
en
Light
Tubular bubble level
Tubular bubble level
IP protection class
Class
Tripod thread
Tribrach thread
POA 80 battery
Type
Rated voltage
Charging time
Temperature
Operating temperature range
Storage temperature range
Dimensions and weights
Dimensions
Weight
Angle units

6 Safety instructions

6.1 Basic information concerning safety

In addition to the information relevant to safety given
in each of the sections of these operating instructions,
the following points must be strictly observed at all
times.

6.2 Misuse

The tool and its ancillary equipment may present hazards
when used incorrectly by untrained personnel or when
used not as directed.
30
1.5 mm at 1.5 m (1/16 at 3 ft)
< 1 mW
Class 2
Segment display
Single-stage
30" / 2mm
IP 55
5/8''
Li-ion
3.8 V
4 h
-20...+50°C (-4°F ...+122°F)
-30...+70°C (-22°F ... +158°F)
164 mm x 154 mm x 340 mm
4.6 kg
DMS, GON
a) Never use the tool without having received the ap-
propriate instruction on its use or without having
read these operating instructions.
b) Do not render safety devices ineffective and do
not remove information and warning notices.
c) Have the tool repaired only at a Hilti Service Center.
Failure to follow the correct procedures when