Crock-Pot CSC051X Notice D'utilisation page 7

CROCK-POT
Power Cord
A
Lid Lock Pin
B
Lid Handle
C
Lid
D
Cooking Pot
E
Heating Base
F
CONTROL PANEL
Display Screen
L
Time Selection Buttons
M
HOW TO USE YOUR CROCK-POT
GETTING STARTED:
Remove all packaging, paper, and cardboard (including any located between the Cooking Pot and Heating Base).
Read and save the literature and be sure to read the service and warranty information.
Visit the Crock-Pot website at www.crockpot.co.uk for additional information, hints, tips and recipes or call 0800 052 3615.
®
ASSEMBLY:
• Place Cooking Pot into the Heating Base
• Place Lid upon Multi-Cooker and align
twist Lid clockwise and align
Locked Lid
GETTING TO KNOW YOUR CROCK-POT
1. Remove the Lid by turning clockwise to unlock, aligning
wash the gasket and the Lid in warm soapy water. Dry the Sealing Gasket and Lid thoroughly before reattaching
the Sealing Gasket to the Lid. Ensure the Sealing Gasket is smoothly and securely in place in the gasket holder. If
the Sealing Gasket is not in the correct position the Lid will not be able to form a seal and will not be able to gain
pressure.
EXPRESS MULTI-COOKER COMPONENTS
®
with
with .
Unlocked Lid
Figure 1
EXPRESS MULTI-COOKER
Control Panel
G
Bobber Valve
H
Steam Release Valve
I
Condensation Collector
J
Power Cord Port
K
UNDERSIDE OF LID
Gasket Fixing Ring
N
Steam Release Valve Cover
O
Sealing Gasket
P
Bobber Valve
Q
Plastic Spoon
R
Steaming Rack
S
EXPRESS MULTI-COOKER
®
. To lock, twist counterclockwise, aligning
with . Remove the Sealing Gasket from the Lid and
7
with . To unlock,
Open Lid
®