Using The Steam Function - Crock-Pot CSC051X Notice D'utilisation

The SLOW COOK function does not use pressure in the cooking process, but some pressure can build inside the unit during
cooking. When using this function, ensure the Steam Release Valve is in the "Release" position. This function will cook
similarly to standard slow cookers, using lower temperatures and longer cooking times to achieve tender, flavorful meals.
Place the Multi-Cooker on a flat, level surface.
Place Cooking Pot inside Heating Base. Plug the Multi-Cooker into a wall outlet. The Multi-Cooker will beep, and the
Display Screen will illuminate with four dashes (- - - -).
1. Place your food and liquid inside the removable Cooking Pot.
2. Place the Lid onto the Multi-Cooker and align
position.
3. Using the finger tab, rotate the Steam Release Valve to the "Release" position.
Note: Although this setting will not use pressure in the cooking process, some pressure can build inside the unit
during cooking. This is why it's important to keep the Steam Release Valve in the "Release" position.
4. Press the SLOW COOK button and adjust the time and temperature as needed.
Note: See the Cooking Guide on page 182 to find the possible time and temperature adjustments.
5. Press START/STOP. The time will begin to count down.
6. After the set cooking time has elapsed, the Multi-Cooker will beep and will automatically switch to the KEEP WARM
setting. The Display Screen will therefore change from the cook time to a new timer that will count up to 4:00 (4 hours)
or until you press the START/STOP button. After 4 hours in the KEEP WARM setting, the Multi-Cooker will turn off.
TIP: The SLOW COOK settings are in the Cooking Guide on page 182.
CAUTION: During slow cooking, steam may build up in the Multi-Cooker, so when lifting the Lid use a kitchen glove or mitt
to protect your hand.
The STEAM function is perfect for gently steaming fish and vegetables. It is pre-programmed to use the HIGH pressure
cooking setting. When steaming, use the Steaming Rack.
Capacity: When the Multi-Cooker is used with the STEAM function, the maximum capacity of liquid should be just under the
rack wires, so that the liquid is not touching the food.
Note: The unit cannot pressure cook without liquid. Ensure a minimum of 250ml of liquid is used inside the removable
Cooking Pot.
Place the Multi-Cooker on a flat, level surface.
Place Cooking Pot inside Heating Base. Plug the Multi-Cooker into a wall outlet. The Multi-Cooker will beep, and the
Display Screen will illuminate with four dashes (- - - -).
1. Add 250ml of water to the bottom of the removable Cooking Pot and insert the cooking rack. Ensure water is just
under the wires of the rack so that food is not touching water.
2. Place your food on the cooking rack.
3. Place the Lid on and lock by rotating counterclockwise to the LOCKED
4. Using the finger tab, flick the Steam Release Valve to the "Seal" position.
5. Press the STEAM button and adjust the time and pressure as needed.
Note: See the Cooking Guide on page 182 to find the possible time and pressure adjustments.
6. Once you have made the desired adjustments, if any, press START/STOP.
7. The Multi-Cooker needs to gain pressure before pressure cooking can begin. When the Multi-Cooker is gaining
pressure, "HEAt" will appear on the Display Screen and the time will not count down. When pressure has been
reached, "HEAt" will disappear on the Display Screen, and the time will begin to count down.
8. After the set cooking time has elapsed, the Multi-Cooker will beep and will automatically switch to the KEEP WARM
setting. The Display Screen will therefore change from the cook time to a new timer that will count up to 4:00 (4 hours) or
USING THE SLOW COOK FUNCTION

USING THE STEAM FUNCTION

with . To lock, rotate counterclockwise to the LOCKED
STEAMING
12
position.