Clearing Blockages; Residual Risks; Symbols On The Product - Ryobi RY18SFX35A Traduction Des Instructions Originales

CLEARING BLOCKAGES

■ Turn off the product, and disconnect it from the power
supply.
■ Always wear heavy-duty gloves when checking or
clearing a blockage.
■ The tines are sharp and the blockage itself could be a
sharp object.
■ Remove the debris collector, check for and carefully
clear obstructions.
■ Check the grass discharge chute and carefully clear
blockages.
■ Turn the product on its side and check the underside
of the product and the area around the tines. Remove
any found blockages carefully. Remember that the tines
may move during cleaning.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise during use, and
the operator should pay special attention to avoid the
following:
■ injury caused by vibration
– Always use the right tool for the job. Use designated
handles. Restrict working time and exposure.
■ injury caused by noise
– Exposure to noise can cause hearing injury. Wear
ear protection and limit exposure.
■ injury from contact with the tines
■ injury caused by thrown objects
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud's Syndrome.
Symptoms may include tingling, numbness, and blanching
of the fi ngers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness, diet,
smoking, and work practices are all thought to contribute to
the development of these symptoms. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
■ Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■ After each period of operation, exercise to increase
blood circulation.
■ Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of the condition,
immediately discontinue use and see your physician.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
4 | English
KNOW YOUR PRODUCT
See page 134.
1. Switch button
2. Handle grips
3. Triggers
4. Upper handle pole
5. Knobs
6. Hex key
7. Tines
8. Switch Key
9. Rear wheels
10. Front wheels
11. Battery
12. Charger
13. Aerator attachment
14. Height adjustment lever
15. Battery cover
16. Rear door
17. Debris collector
18. Lower handle assembly
19. Wiring

SYMBOLS ON THE PRODUCT

Safety alert
Please read the instructions carefully
before starting the product.
Wear ear protection.
Wear eye protection.
Do not expose to rain or damp condition
Beware of thrown or fl ying objects.
Keep all bystanders, especially children
and pets, at least 15 m away from the
operating area.
Beware of sharp tines.
Tines continue to rotate
after the motor is switched off.
Remove the isolator key before
maintenance.
Do not operate on inclines greater than
15°. Use the product across the face of
slopes, never up and down.
Working width: 35 cm