Motor Unit; Before Initial Use; Using Accessories Correctly - DS Produkte HZ-S04 Mode D'emploi

EN

Motor Unit

16
15
14

Before Initial Use

1. Remove any protective fi lms and stickers that may be present from the device.
2. The accessories may still have some production residues on them. To avoid harmful
effects to your health, clean the device thoroughly before you fi rst use it (see "Clean-
ing and Storage").
3. Familiarise yourself with the accessories. Do this by reading the following chapter.

Using Accessories Correctly

Cross-Blade Attachment
ATTENTION!
■ Risk of damage to the cross-blade attachment! Do not drop the cross-blade
attachment and do not leave it lying in water or other liquids for longer than two hours
to avoid damage.
The cross-blade attachment is used to chop up, stir and mix together the ingredients in
the mixing bowl.
The device cannot be operated without the cross-blade attachment.
Inserting
1. Before inserting the cross-blade attachment, ensure that the sealing ring is
fi tted correctly on the shank of the attachment. Otherwise there is the risk that
liquid will escape from the mixing bowl into the motor unit and the device will be
damaged.
If the sealing ring is not fi tted correctly, slide it all the way onto the shank until it is
fi rmly fi xed behind the two latches on the shank.
34
11 Scale
12 Control panel
11
13 On / Off switch (rocker switch on
the back)
14 Suction feet
15 Release button for releasing the
12
mixing bowl from the motor unit
16 Mixing bowl mount
13