DS Produkte HZ-S04 Mode D'emploi page 43

Weighing
Make sure that the device is positioned stably on a fl at work surface and the
suction feet stick to it properly so that the scale can display the most accurate
measurement results possible.
1. Switch on the motor unit by fl ipping the On / Off switch on the back of the motor unit
to the I position.
START / STOP button to activate the device.
2. Press the
3. Press the button to activate the weighing function.
The preset unit of measurement is grams. You can change the unit of measurement
by repeatedly pressing the
ounces (oz))
4. Place the ingredient to be weighed onto the scale. The weight is displayed.
5. If the button is pressed and held for approx. 3 seconds, the tare function (Tare)
is activated and the weight displayed is reset to 0. Additional ingredients can now be
placed on the scale to be weighed.
43
button (grams / kilograms (g / kg) – pounds (lb) –
EN