Cleaning And Maintenance; Troubleshooting; Disposal - Brandt BFC3852PW Guide D'installation Et D'utilisation

EN

5. CLEANING AND MAINTENANCE

1. Unplug the appliance.
2. Remove all substances.
3. Clean the inside and outside walls with
a clean sponge or soft cloth using warm
water or 1 teaspoon of bicarbonate of
soda to 1.2 litres of water.
4. Rinse well and wipe dry with a clean soft
cloth.
If the appliance is not to be used for a long
period of time then it is recommended to re-
move all the food stuff, clean the inside of the
appliance and leave the door open to allow
FR

6. TROUBLESHOOTING

Before calling for service please check the
following.
The appliance is not working.
Check the plug is inserted correctly into the
mains socket.
Check there is power to the mains socket by
plugging another appliance in, if the other
appliance works check the fuse in the plug.
The appliance is noisy when
operating.
Check the appliance is level and it is not in
contact with another appliance or kitchen
furniture.
FR

7. DISPOSAL

The refrigerating gas contained in the circuit
of this appliance is isobutane (R600a); it
causes a low level of pollution but is inflam-
mable. Please contact your local disposal
department for advice on the correct method
of disposal.
the air to circulate thus avoiding unpleasant
odours.
Lamp in the fridge
Parameters of the lamp: 12V~, max 1W.
The lamp adopts LED as its light source,
featuring low energy consumption and long
service life. If there is any abnormality, please
contact the store where you purchase the
appliance.
The appliance does not cool
sufficiently
If the door has been opened too often
or it has been left open for a while it will
take time for the appliance to reach its set
temperature.
check the airflow over the rear of the
appliance has not been reduced due to
insufficient clearance.
Check if a large quantity of fresh food has
been introduced.
24