Cleaning And Maintenance - Brandt BFC8632NW Manuel D'instructions

Your appliance complies with
the European directives and
their amendments.
ENERGY-SAVING
MEASURES
In order to reduce the power
consumption of your appliance:
• Install it in a suitable location
(see "Installing your appliance").
• Leave the doors open for the
shortest time possible.
• Never put hot food in the
fridge or the freezer, and in
particular soups and other
preparations that release a lot
of steam.
• Check that your appliance is
working correctly and do not
allow too much ice to
accumulate in the freezer
(defrost when the ice is more
than 5-6 mm thick). Clean the
condenser on a regular basis
(see chapter "Routine
maintenance of your appliance").
• Regularly check the door
seals and make sure that the
doors can be closed properly.
If this is not the case, contact
after-sales service.
• Do not adjust the temperature
too low.
• Failure to install the draws,bins
and shelves properly can result
in increased power consumption.
Warning
If your transported the appliance
horizontally, position it vertically
and wait for 2 hours before
connecting it. A little oil may flow
into thecooling circuit. Allow
enough time for the oil to return to
the motor before connecting the
appliance, failing which, it
could be
Always unplug your appliance
before any maintenance work.
Never pull on the power cord,
but only on the plug itself.
CLEANING AND
MAINTENANCE
z Always switch off the appliance
before any maintenance operations.
z Never clean the appliance with
metal objects, steam systems,
volatile oils,organic solvents or
abrasive components.
z Do not use sharp or cutting objects
to remove the ice. Use a plastic sponge.
z Refer to the "Maintenance"chapter
in this manual to replace the light bulb.
service and disposal. There are
flammable materials at the back of the
appliance. Pay attention to the
symbol "Risk of fire – flammable
material" which is located on rear of
the appliance.
35
WARNING! Please keep
the product far away
fire source during using,