Technical Data - S+S Regeltechnik THERMASGARD ASTF Pt100 Notice D'instruction

G
®
THERMASGARD
Resistance thermometer THERMASGARD
of impact-resistant plastic and housing cover with quick-locking screws. This radiation sensor is
specifically designed for temperature detection in wet areas or in larger rooms or halls. The on-
wall radiation temperature sensor ASTF determines the effective portion of active radiation or the
effective radiant heat at the measured location. Due to the measuring method employed by the
dark radiation temperature sensor, excellent and room-representative measuring results are
achieved.

TECHNICAL DATA

Measuring range:
Sensors ⁄ output:
Connection type:
Testing current:
Insulating resistance:
Process connection:
Housing:
Housing dimensions:
Cable connection:
Electrical connection:
Humidity:
Protection class:
Protection type:
THERMASGARD ® ASTF
Type ⁄ WG03
ASTF
A S T F P t10 0
A S T F P t10 0 0
A S T F Ni10 0 0
A S T F Ni T K
A S T F L M 2 3 5 Z
A S T F N T C1,8 K
A S T F N T C10 K
A S T F N T C 2 0 K
Extra charge:
ASTF
® ASTF with passive output, terminal box housing made
– 30 ...+ 75 °C
see table, passive (optional also with two sensors)
2-wire connection (4-wire connection on PT100,
optional on other sensors)
< 0.6 mA (Pt1000)
< 1.0 mA (Pt100)
< 0.3 mA (Ni1000, Ni1000 TK5000)
< 2.0 mW (NTC xx)
400 μA...5 mA (LM235Z)
≥ 100 MΩ, at +20 °C (500 V DC)
by screws
plastic, UV-resistant, material polyamide, 30 % glass-globe
reinforced, with quick-locking screws (slotted ⁄ Phillips head
combination), colour traffic white (similar to RAL 9016),
semi-globe: black
72 x 64 x 37.8 (51.8) mm (Tyr 1)
cable gland, plastic (M 16 x 1.5; with strain relief,
exchangeable, max. inner diameter 10.4 mm) or
M12 connector according to DIN EN 61076-2-101
(optional on request)
0.14 - 1.5 mm², via terminal screws
< 95 % r. H.
III (according to EN 60 730)
IP 65 (according to EN 60 529) Housing tested,
TÜV SÜD, Report No. 713139052 (Tyr 1)
On-wall radiation temperature sensors
Sensor ⁄ Output
Pt100 (according to DIN EN 60 751, B)
Pt1000 (according to DIN EN 60 751, class B)
Ni1000 (according to DIN EN 43 760, class B, TCR = 6180 ppm ⁄ K)
Ni1000 TK5000 (TCR = 5000 ppm ⁄ K), LG - Ni1000
LM235Z (TCR = 10 mV ⁄ K; 2.73 V at O °C), KP10
NTC 1.8 K
NTC 10K
NTC 20K
two or other sensors optional
cable connection with M12 connector according to DIN EN 61076-2-101
Rev. 2021 - V15
1x two-wire connection
Standard
1x two-wire connection
LM 235 Z (KP 10)
1x three-wire connection
(optional)
1x four-wire connection
(optional)
Item No.
IP 65
1101- 1060- 1003-000
1101- 1060- 5001-000
11 01-1060- 9001- 000
1101- 1061- 0001-000
1101- 1062- 1001-000
1101- 1061- 2001-000
1101- 1061- 5001-000
1101- 1061- 6001-000
on request
on request