Repair; Disposal; Spare Parts - Simco-Ion ThunderION Notice D'utilisation

9. Repair

Warning:
When carrying out work on the equipment, disconnect the power supply.
-
- Repairs must be carried out by a skilled electrical fitter.
- When opening the equipment, you may touch parts under hazardous voltage.
Repairs which you can carry out on your own:
-Replacing the fuse (3.15 AT, 250 V).
-Replacing/repairing the cabling.
-Replacing sealing caps for connectors and the remote/local switch.
For other repairs, SIMCO (Nederland) B.V. advises you to return the Control Module.
Request an RMA form by sending an e-mail to service@simco-ion.nl.
Pack the Control Module properly and clearly state the reason for return.

12. Disposal

Local environmental regulations apply when disposing of the equipment.

13. Spare parts

Item No.
75.10.01.4480
75.10.01.4490
45.10.14.0125
45.10.14.0130
69.99.63.0315
93.70.59.3115
66.03.06.0128
ControlModuleThunderION_UM_9752160020_NL_D_GB_F_V1_1
Description
6 m Control Module connecting cable
12 m Control Module connecting cable
6-pole (Bar) Control Module connector
12-pole (I/O) Control Module connector
5x 20 mm 3.15 AT fuse
Sealing cap for remote/local switch
Sealing cap for 6- and 12-pole connectors
30