Connecting The I/O Control Module (Optional); Connecting The Remote On/Off Function - Simco-Ion ThunderION Notice D'utilisation

4.4.3. Connecting the I/O Control Module (optional)

For various remote functions, a 12-pole connector is fitted (Fig. 3).
For installation of I/O, 12x 0.12mm
The following connector and cables can be delivered separately by SIMCO (Nederland) B.V.:
-12-pole (I/O) Control Module connector
- Remote cable MPM:
Fig. 3 Layout of 12-pole (I/O)
Control Module connector (chassis
front view).

4.4.3.1. Connecting the remote ON/OFF function

To use the remote ON/OFF function, the switch behind the stopper must be set (see Fig. 4).
The switch must be moved to the left (remote).

Attention:
If the remote ON/OFF function is not or no longer required:
-
Set the switch behind the stopper back to local
ControlModuleThunderION_UM_9752160020_NL_D_GB_F_V1_1
2
unshielded cable is recommended.
6m
12m
25m
PIN Wire
1 White
2 Brown
3 Green
4 Yellow
5 Grey
6 Pink
7 Blue
8 Red
9 Black
10 Violet
11 Grey/pink
12 Red/blue
Fig. 4 Remote/local switch
Simco item No. 4510140130
Simco item No. 6807004160
Simco item No. 6807004161
Simco item No. 6807004162
Function
Remote on bar 1
Bar 1 operating OK
Remote on bar 2
Bar 2 operating OK
Remote on bar 3
Bar 3 operating OK
Remote on bar 4
Bar 4 operating OK
Remote on common cathode
Bar operating OK common collector
+24Vdc out
0V (internally connected to earth)
26