Hot Water; Other Functions: Prog Button; Settings - Krups ESPRESSO AUTOMATIC EA84 Série Manuel D'utilisation

IFU_KR_EA84_NAFTA_EA84 25/10/13 11:01 Page17

Hot water

Check that the super cappuccino accessory / steam nozzle is properly locked in place on
its support.
When the screen displays the drink selection menu, press "HOT WATER". A message
invites you to place a container under the steam nozzle and choose the volume.
You can start producing hot water by pressing "OK".
Press any button to stop the steam function. If the steam nozzle is obstructed, unblock
!
using the needle supplied. Fig.16.
You can access the menu for the appliance's other functions by pressing the Prog button.

Settings

The "Settings" menu allows you to make the necessary changes for your own optimum
user comfort and preferences. Below are the main settings available.
Date
Clock
Language
Country
Unit of
measurement
Screen brightness
Coffee temperature You can adjust the temperature of your recipes based on three
Water hardness
Auto-on
Auto-off

OTHER FUNCTIONS: Prog button

The setting of the date is necessary in particular if using an anti-
limescale cartridge.
You can select a 12 or 24 hour display.
You can choose your preferred language from the suggestions.
You can select your country of residence.
You can choose between ml and oz.
You can adjust the screen contrast to your preference.
levels.
You should adjust the water hardness between 0 and 4. See
chapter "Measuring water hardness".
You can set the automatic pre-heating to a certain time.
You can choose the length of time after which the appliance will
switch off automatically.
17