Silverline 869235 Mode D'emploi page 6

GB
Introduction
Thank you for purchasing this Silverline tool . This manual contains information necessary for safe
and effective operation of this product . This product has unique features and, even if you are familiar
with similar products, it is necessary to read this manual carefully to ensure you fully understand the
instructions . Ensure all users of the tool read and fully understand this manual .
Description of Symbols
The rating plate on your tool may show symbols . These represent important information about the
product or instructions on its use .
Wear hearing protection .
Wear eye protection .
Wear breathing protection .
Wear head protection .
Wear hand protection .
Read instruction manual .
Always disconnect from the power supply when adjusting, changing accessories,
cleaning, carrying out maintenance and when not in use!
Class I construction (protective earth)
Risk of electrocution!
Conforms to relevant legislation and safety standards.
Environmental Protection Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with your local authority
or retailer for recycling advice .
Technical Abbreviations Key
V
Volts
~, AC
Alternating current
A, mA
Ampere, milli-Amp
n
No load speed
0
λ
Wavelength
°
Degrees
Diameter
Ø
Hz
Hertz
W, kW Watt, kilowatt
/min or min- Operations per minute
1
dB(A) Decibel sound level (A weighted)
6
Original Instructions
Specification
Voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V~/50Hz
Power: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550W
No load speed: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2335min-
Max flow rate: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10,500 Ltr/hr
Maximum head height: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7m
Minimum water level: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mm
Maximum submersion depth: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8m
Maximum particle size: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20mm
Maximum water temp: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35˚C
Output hose connection: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 to 32mm (1" to 1-1/4")
Cable length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10m
Ingress protection: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IPX8
Protection class: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions (L x W x H): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 x 170 x 300mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 .28kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice .
Carefully read and understand this manual and any label attached to the tool before use. Keep these
instructions with the product for future reference . Ensure all persons who use this product are fully
acquainted with this manual .
Even when used as prescribed it is not possible to eliminate all residual risk factors . Use with
caution . If you are at all unsure of the correct and safe manner in which to use this tool, do not
attempt to use it .
General Safety
WARNING: Read all safety warnings, instructions, illustrations and specifications
provided with this power tool. Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool .
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes .
c) Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control .
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock .
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded .
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will
increase the risk of electric shock .
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock .
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock .
f) If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol
or medication. A moment of inattention while operating power tools may result in serious
personal injury .
b) Use personal protective equipment. Always wear eye protection. Protective equipment
such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate
conditions will reduce personal injuries .
c) Prevent unintentional starting. Ensure the switch is in the OFF-position before connecting
1