10. Press
• the button under the display fi eld
Setting Menu, once the air valve has been cleaned, or
• the operating button under the display fi eld
leave cleaning until later.
NOTE!
– We recommend always rinsing out the milk
system and cleaning the coffee-milk dispenser
(incl. the air valve) after making coffee, or at
least at the end of each day if milk has been used.
– Always remove the milk tube from the coffee-
milk dispenser before switching off. Ensure that
the individual components are thoroughly dried
before reassembly.
6.4
Preparing coffee with coffee powder
You can also prepare a coffee speciality with coffee powder. This
is especially useful if you want to prepare a decaffeinated coffee,
for example.
CAUTION!
Incorrect fi lling can damage the device.
– Only add coffee when the device asks you to.
– Only add coffee made of ground beans (no
instant beverage powder, coffee granules,
cocoa, etc.).
– Fill the powder chamber with ground coffee, up
to a maximum of 10 g.
– Fill the powder chamber only once for each cup
portion, not multiple times.
Version 3 2014-11
, to return to the Beverage
, if you want to
1. Proceed as described in chapters ►"6.3.1 Preparing coffee or
espresso" and ►"6.3.2 Preparing coffee-milk specialities" to select the
desired beverage.
2. Instead of selecting the strength of the coffee, use the button under the
display fi eld
to select the symbol
3. After you have selected the desired water and milk quantities, press OK.
After a short time, the display shows:
Â
Please fill coffee grounds
4. Open the powder chamber and put in the required amount of ground
coffee. (fi g. 7)
5. Close the powder chamber.
6. Press OK again.
The desired coffee speciality is prepared.
Â
7. To make changes to the liquid quantities while dispensing is on
progress, press the arrow keys as described in the sections ►"6.3.1
Preparing coffee or espresso" and ►„"6.3.2 Preparing coffee-milk
specialities".
.
.
45
GB