www.evolutionpowertools.com
EC DECLARATION OF CONFORMITY
The manufacturer of the product covered by this Declaration is:
Evolution Power Tools, Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR.
The manufacturer hereby declares that the machine as detailed in this declaration fulfils all the
relevant provisions of the Machinery Directive and other appropriate directives as detailed below.
The manufacture further declares that the machine as detailed in this declaration, where applicable,
fulfils the relevant provisions of the Essential Health and Safety requirements.
The Directives covered by this Declaration are as detailed below:
2006/42/EC.
Machinery Directive.
2014/30/EU.
Electromagnetic Compatibility Directive.
2011/65/EU.
The Restriction of the Use of certain Hazardous
Substances in Electrical Equipment (RoHS) Directive.
2012/19/EU.
The Waste Electrical and Electronic Equipment (WEEE) Directive.
And is in conformity with the applicable requirements of the following documents:
EN 13898:2003/A1:2009 • EN 60204-1:2006/A1:2009 • EN55014-1:2006+A1+A2
EN55014-2: 2015 • EN61000-3-2:2014 • EN61000-3-11: 2000 • EN ISO 12100:2010
Product Details
Description:
EVOSAW185: 185mm Steel Cutting Chop Saw
Evolution Model No:
230v: 081-0001, 081-0003
Brand Name:
EVOLUTION
Voltage:
230-240v ~ 50 Hz
Input:
1250W
The technical documentation required to demonstrate that the product meets the requirements
of directive has been compiled and is available for inspection by the relevant enforcement
authorities, and verifies that our technical file contains the documents listed above
and that they are the correct standards for the product as detailed above.
Name and address of technical documentation holder.
Signed:
Date:
The place of keeping technical documents:
Print: Matthew Gavins: Group Chief Executive.
05/06/2017
Venture One, Longacre Close, Sheffield, S20 3FR
19
EN