Switching Off The Weighing Function; Temperature Display - SilverCrest HG02308 Instructions D'utilisation Et Consignes De Sécurité

button
6
runs faster.
Press the ▲ ZERO / TARE button
to set the time in 10 minute intervals.
Press the T-SET button
the ▲ ZERO / TARE button
the time in 1 minute intervals.
Press the T-SET button
button
7
intervals.
Press the T-SET button
button
7
tervals.
Press the T-SET button
Note: You can reset the timer. To do this press the T-SET
button
4
A signal sounds as soon as set time period has elapsed.
Press any button to switch off the signal.

Switching off the weighing function

Note: If the product has not been used for about 2 minutes, it
switches automatically to the clock mode.
Press the ON / OFF button
clock mode.

Temperature display

The temperature is shown in °C in the lower right of the
LC display
5
34 GB/IE
, so that the time readout in the LC display
4
4
or ▼ UNIT button
4
or ▼ UNIT button
4
.
.
or ▼ UNIT button
7
once to accept the setting. Press
or ▼ UNIT button
7
once. Press the ▲ ZERO / TARE
to set the time in 10 second
6
once. Press the ▲ ZERO / TARE
in set time in 1 second in-
6
to start the countdown.
to return manually to the
3
5
6
to set
6