JUMO 70504200T94Z000K000 Notice De Montage page 45

2 Mounting
The "10x" switch is used to set the tens digit of the alias device address, the "1x" switch is used for the
unit digit (mandatory module: both switches in position 0). The alias device address is freely selectable,
but must be unique within the system. For more information, refer to the operating manual of the central
processing unit.
Installation of a router module 3-port (705042)
(A) (A1)
(B) (A)
(B3)
(B4)
(A2)
Process:
1. Mount the router module (A) in the DIN rail from above (A1).
2. Pivot the router module (A) downward until it snaps into place (A2).
3. Position the end bracket (B) on the DIN rail and move to the right against the router module (B3).
4. Fasten the end bracket (B) using a screwdriver (B4). For this purpose, ensure that the end bracket
is positioned flush against the router module.
13