Power Component Specifications - JDSU Wavetek Série Guide De Démarrage

e. Accuracy and behavior from 100 MHz to 1000 MHz for levels
between –5 to 50 dBmV (typical)
f. IP address is specified in the DOCSIS® 1.1 and 2.0 operations support system
interface (OSSI) specifications

Power Component Specifications

Tableau 3 Power Component Specifications
Item
Charger Module
Input
Operational voltage range
Input protection
Connector
Environmental
Operational temperature range
Storage temperature range
High fast-charge inhibit range
Low fast charge inhibit range
Humidity range
Output - NiMH Battery
Battery life
Fast charge rate
Maximum charge time
Output - Li-Ion Battery
Battery life
DSAM Product Family Quick-Start Guide Rev. C
Appendix A Caractéristiques
Power Component Specifications
Description
11 to 14VDC (nominal = 12V DC)
Reverse polarity; ESD
2.5 mm coaxial
-20 to +50 °C (0 to +120 °F)
-20 to +80 °C (0 to +176 °F)
60 °C (± 5 °C) (140 °F)
0 °C (± 5 °C) (+32 °F)
0 to 95% RH (non condensing)
3 hours (typical)
1000mA ± 10% @ 7.2V
Up to 5 hours
4.5 Hours (typical)
55