Special Safety Instructions - Virax 575002 VULCA VIWEL + 400 Manuel D'utilisation

13 Avoid abnormal postures. Make sure to stand securely and always keep your balance.
14 Maintain your tools with care. For better and safer work, keep cutting tools sharp and clean. Follow
the instructions for lubrication and changing tools. Regularly inspect the electric tool's connection
cable, and if it is damaged, have it replaced by an authorized expert. Regularly check extension cords,
and replace them if they are damaged. Keep the handles dry, clean and free of oil and grease.
15 Pull the plug from the socket. When not using the electric tool, before maintenance or when changing
tools, such as saw blades, drills and cutting bits.
16 Do not leave any tool keys inserted. Before switching on, check to see that keys and adjustment tools
have been removed.
17 Avoid unintentional activation. When plugging the tool in, make sure that the switch is turned off.
18 Use outdoor extension cords. When outdoors, use only extension cords that are approved and
appropriately marked.
19 Be alert. Pay attention to what you do. Approach your work sensibly. Do not use the electric tool when
you are distracted.
20 Check the electric tool for damage. Before using the electric tool, you must inspect safety equipment
or slightly damaged parts carefully to ensure that they work properly and as intended. Check to see
that the moving parts operate freely and don't stick, and to make sure no parts are damaged. All parts
must be mounted properly and meet all the conditions for ensuring trouble-free operation of the
electric tool.
Damaged safety equipment and parts must be properly repaired or replaced by a professional facility,
unless otherwise indicated in the user manual. Damaged switches must be replaced by a customer
service facility.
Never use an electric tool whose switch cannot be turned on and off.
21 Caution. Using other insertion tools and accessories may cause injury.
22 Have your tool repaired by an electrical expert. This electric tool meets applicable safety
requirements. Repairs must be made only by an electrical expert using original replacement parts.
Otherwise accidents many occur.

1.3 Special safety instructions

- There is danger of suffering an electric shock when using faulty insulation.
- There is danger of suffering burns due to the high temperatures of the housing during intensive use or
longer welding operations.
Page 20