Introduction; Parts And Service; Nameplate; Uncrating The Machine - Clarke Clean Track 16 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH / A-3
EN

INTRODUCTION

This manual will help you get the most from your Clarke
carpet extractor. Read it thoroughly before operating the machine.
®
This product is intended for commercial use only.

PARTS AND SERVICE

Repairs, when required, should be performed by your Authorized Clarke Service Center, who employs factory trained service personnel, and
maintains an inventory of Clarke original replacement parts and accessories.
Call the CLARKE DEALER named below for repairs or service. Please specify the Model and Serial Number when discussing your machine.
(Dealer, affi x service sticker here.)

NAMEPLATE

The Model Number and Serial Number of your machine are shown on the Nameplate, located on the rear base of the machine. This information is
needed when ordering repair parts for the machine. Use the space below to note the Model Number and Serial Number of your machine for future
reference.
MODEL
SERIAL NUMBER

UNCRATING THE MACHINE

When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident, save the shipping carton so
that it can be inspected. Contact the Clarke Customer Service Department immediately to fi le a freight damage claim.
FORM NO. 56041660 - Clean Track
16, 18 - A-3
®

Publicité

Table des Matières
loading

Table des Matières