Safety Instructions Relating Specifically To The Equipment - Meister i-drill MAS36ip3 Traduction Du Manuel D'utilisation Original

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
5450210-Akku-Schra_man 11.03.16 08:41 Seite 44
contact with this. In the event of
accidental contact, rinse with
water. If liquid should get into
the eyes, get medical assistance.
Battery fluid may result in skin
irritations and burns.
h Do not open the battery. There is a
risk of short-circuiting.
i Protect the battery from heat, for
example, from constant sun and
fire. There is a risk of explosion.
j Never short circuit the battery.
There is a risk of explosion.
k In the event of damages and
incorrect use, vapours may come
out of the battery. Ensure plenty of
fresh air and, if you have any
symptoms, consult a doctor. These
vapours may irritate the respiratory
system.
6 – Safety instructions relating
specifically to the equipment
CAUTION! The device has a
risk group 1 LED as workplace
illumination. Do not look directly into
the LED as this may result in damage
to the eyes.
• Use the appliance, the charger and the
attachments, only for their intended
applications!
• Before you put the screwdriver down,
make sure all moving parts have
come to a standstill.
• Avoid frequent blocking when drilling,
tightening or loosening screws.
44
• Connect the charger only to a
220-240 V AC power supply.
• Only charge the screwdriver battery
with the associated charger.
• Protect the charger and screwdriver
from moisture. Never submerge in
water!
• Do not use the charger in the open air.
• To avoid damage to the batteries,
never expose them to temperatures of
over 50 °C.
CAUTION! Do not short-circuit the
contacts of the battery or charger.
• When charging, ensure that the
device is correctly connected („+/–").
• Do not attempt to burn the battery.
• The connection cord cannot be
replaced. In case of damage, dispose
of the device in the correct manner. In
case of damage, dispose of the
device in the correct manner.
Safety marking
The symbols on the housing mean the
following:
Type No. and year of
manufacture
Type designation
Motor
Idling speed

Publicité

Table des Matières
loading

Table des Matières