Abus TVIP41660 Notice D'utilisation page 134

Arming Schedule
To save a schedule for an alarm input, click on "Edit".
A new window appears. Specify here on which days of the week and at which times the alarm input
should be enabled.
Now select a day of the week for the alarm input. To store particular time periods, enter a start and
end time. To activate the alarm input all day, select 00:00 as the start time and 24:00 as the end time.
To apply the settings for all days of the week, click the "Select All" checkbox. To copy the settings to
other days of the week, select the day of the week and click on "Copy".
To apply the changes, click "OK" and to discard them click "Cancel".
Linkage Method
Here you can set the action to be performed in case of an alarm.
Linkage Method
Send email:
Notify Surveillance Centre
Enable recording:
Other Linkage
You can set the alarm output to switch when an alarm is detected.
Click on "Select All" to switch the alarm output.
PTZ Linking:
You receive an email as notification; check the checkbox to activate
this.
If your camera has been set up for this, you can send a notification to
the CMS.
Enables recording to the internal microSD card.
Choose a preset position to which the camera should pan if the alarm is
triggered.
134
English