Tcp/Ip - Abus TVIP41660 Notice D'utilisation

English

TCP/IP

To be able to operate the camera via a network, the TCP/IP settings must be configured correctly.
Select NIC:
Choose the network interface to configure. The camera can either be connected to the network via
LAN or WLAN.
DHCP
If a DHCP server is available, click DHCP to apply an IP address and other network settings
automatically. The data is transferred automatically from the server and cannot be changed manually.
If no DHCP server is available, please enter the following data manually.
IPv4 Address
Setting of the IP address for the camera
IPv4 Subnet Mask
Manual setting of the subnet mask for the camera
IPv4 Default Gateway
Setting of the default router for the camera
102