Important - Britax MULTI-TECH II Mode D'emploi

Masquer les pouces Voir aussi pour MULTI-TECH II:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 98

Important!

GB
9-25 kg group 1-2 (approx. 9 months – 6 years)
Please read through these operating instructions carefully, BEFORE installing your child seat.
The Hampshire Trading Standards Authority and Britax
recommend neither buying nor selling on used child
seats. Please dispose of your child seat safely and
environmentally. Do not sell it or pass it on.
After an accident, the child seat the car seatbelts should
be replaced. Even if these appear to be undamaged,
your child seat and your car seatbelts can not longer
protect your child suf ciently in the case of a subsequent
accident.
No child seat is escape-proof
Harness systems cannot be designed in an absolutely
"child-safe" manner; however, they comply with the legal
requirements of the European standard ECE R44. The
belt must always be correctly applied and adjusted, and
the child must be required to keep the harness system
on.
Care for your child seat
Food and drink residues can enter into the harness
buckles. This can result in the harness buckles not
functioning properly – they will not lock in. Clean the
harness buckles with warm water (Fig. A and B).
A
Follow these operating instructions carefully and precisely. If this seat is not securely installed
and your child is not strapped in correctly, your child and other passengers are exposed to the
risk of serious injury in case of an accident.
B
Cleaning the cover
Please read the labels with the laundry instructions for
the cover.
Do
NOT
dry the cover in a mechanical dryer, but rather,
spin and allow to dry afterwards.
Cleaning the harnesses and seat shell
Clean with a sponge and ONLY use hand washing
detergent and warm water.
When cleaning, do
NOT
any harnesses or parts of harnesses or the seat.
DO NOT USE ANY
solvents, chemical detergents or
liquid laundry detergents, as these can damage the
harnesses and the seat.
Do
NOT
grease of oil the seat parts.
Removing and putting on cover
harness adjustment button
Press the
shoulder harnesses under the chest pads using your
hand, as far forward as possible
Pull the bracket behind the seat forward and unhook
both shoulder harnesses.
remove or attempt to remove
and pull BOTH

Publicité

Table des Matières
loading

Table des Matières