Dremel PC10 VERSA Traduction De La Notice Originale page 9

or instruction concerning use of the appliance by a
person responsible for their safety.
k. Keep bystanders a safe distance away from work
area. Anyone entering the work area must wear
personal protective equipment. Fragments of
workpiece or of a broken accessory may fly away and
cause injury beyond immediate area of operation.
l. Never lay the tool down until the accessory has
come to a complete stop. The spinning accessory may
grab the surface and pull the tool out of your control.
m. Do not run the tool while carrying it at your side.
Accidental contact with the spinning accessory could
snag your clothing, pulling the accessory into your body.
n. Children should be supervised to ensure that they
do not play with the appliance.
DO NOT WORK WITH MATERIALS CONTAINING
!
ASBESTOS (asbestos is considered carcinogenic)
TAKE PROTECTIVE MEASURES WHEN DURING
!
WORK DUST CAN DEVELOP THAT IS HARMFUL TO
ONE'S HEALTH, COMBUSTIBLE OR EXPLOSIVE (some
dusts are considered carcinogenic); wear a dust mask
and work with dust/chip extraction when connectable
SPECIFICATIONS
Model number . . . . . . . . PC10
Voltage. . . . . . . . . . . . . . . 3.6 V
Speed . . . . . . . . . . . . . . . 2,200/min
Max. accessory ∅ . . . . . . 64 mm
Battery capacity . . . . . . . . 7.2 Wh
Weight . . . . . . . . . . . . . . . 0,452 kg
CHARGER
Input. . . . . . . . . . . . . . . . . 100-240 Vac, 50/60 Hz, 150 mA
Output . . . . . . . . . . . . . . . 5.0 Vdc, 1.0 A
Weight . . . . . . . . . . . . . . . 0.1 kg
Always check that the supply voltage is the same as
the voltage indicated on the nameplate of the charger.
GENERAL
A. Grip
B. Micro USB Port
C. Charging Lights
D. Threaded Shank
E. Micro USB
F. USB Charging Cable
G. USB
H. Power Adapter
I. On/Off button
J. Slot
K. Pin
L. Splash Guard*
M. Bristle Brush - PC364*
N. Backing pad
O. Loop side
P. Accessory
Q. White Foam Eraser Pad – PC362*
R. Blue Microfiber Non-Scratch pad – PC363*
S. Brown Abrasive Heavy-Duty pad – PC361*
*) not standard included
6
CHARGING AND BATTERIES
• This charger can be used
by children aged 8 and
above and by persons who
have physical, sensory or
mental limitations or a lack
of experience or knowledge
if a person responsible
for their safety supervises
them or has instructed
them in the safe operation
of the charger and they
understand the associated
dangers (otherwise there is
a danger of operating errors
and injuries)
• Supervise children (this will
ensure that children do not
play with the charger)
• Only use chargers matching correct specifications as
previously described.
• DREMEL charger 26150510AB (U.K. 26150510AC)
compatible with this tool
• Do not expose tool/charger/battery to rain
• Do not charge battery in damp or wet environments
• Do not use charger when damaged; take it to one of
the officially registered DREMEL Service Stations for a
safety check
• Do not use charger when cord or plug is damaged;
cord or plug should be replaced immediately at one of
the officially registered DREMEL Service Stations
• Do not use battery when damaged; it should be
replaced immediately
• Do not disassemble charger or battery
• Do not attempt to recharge non-rechargeable batteries
with the charger
• Permitted ambient temperatures (tool/charger/battery):
– when charging 0...+45ºC
– during operation -20...+50ºC
– during storage -20...+50ºC
CHARGING BATTERY PACK
Use power adapter matching charger specification
above to charge Dremel Versa.
Charge Dremel Versa with a USB cable provided by
Dremel. Use of other USB cables may result in tool
and property damage and personal injury.
Your Dremel PC10 does not come completely charged
from the factory. Be sure to charge tool prior to initial use.
1. Insert USB cable "F" into USB port of power adapter
9
7