Connecting the charging station
Connect the charging station
as illustrated in the diagram.
For safety reasons, only use the power
adapter plug supplied.
Inserting the rechargeable batteries
Insert the batteries in the open battery compartment. Only
use batteries of the type AAA NiMH 1.2 V.
Pay attention to correct polarity.
Close the battery compartment.
Charging the batteries
Before the handset is used for the first time, insert it in the base station/charging
station for at least 14 hours.
When the handset is inserted in the base station/charging station properly, an acoustic confirma-
tion signal is issued the charge control lamp lights up. The handset warms up during the charging
process. This is normal and does not represent a risk. Do not charge the handset with charging
units from other manufacturers.
The current battery charge status is indicated in the display:
Full
Only applies to telephone sets with at least two handsets . Checking the package con-
1
tents" on Page 44.
Putting the Telephone into Operation
1
Mains power outlet
24
Half empty
Low
Empty
45