Sony VSP-BZ10 Manuel D'installation page 27

Confirming
Operation
Use an SDHC Memory Card to confirm that
the player is operating.
1
Insert an SDHC Memory Card that
holds content into the player.
2
Turn on the player and display.
Playout of the content stored on the
SDHC Memory Card will then start
automatically.
Compatible Media and File
Formats
Media
SDHC Memory Cards
(Class 10), USB flash drive
File format
JPEG format, H.264 format,
MPEG2 format, etc.
Maximum resolution
JPEG format: 1920 × 1080
PNG format: 1920 × 1080
BMP format: 1920 × 1080
H.264 format: 1920 × 1080
MPEG2-TS format:
1920 × 1080
MPEG2-PS format:
720 × 576
Minimum resolution
320 × 240
(PNG format only)
640 × 480 (all others)
* The higher the resolution, the longer images
take to display.
For details, refer to the Operating
Instructions included as a PDF file on the
CD-ROM (Software & Manuals for Digital
Signage Player) supplied with the
VSP-BZ10.
*
Confirming Operation / Removing an SDHC Memory Card
Removing an SDHC
Memory Card
1
Remove the slot cover fastening screw
with a Philips screwdriver.
2
Press in the SDHC Memory Card, and
remove the card.
3
Replace the slot cover and tighten the
fastening screw with a Philips
screwdriver.
Note
Before removing an SDHC Memory Card,
make sure to see "Precautions" on page 20.
27