Sony VSP-BZ10 Manuel D'installation page 26

Preparing the
Memory
An SDHC Memory Card is required to use
this player. If necessary, you can also use
USB flash drives.
For information on supported media (SDHC
Memory Cards and USB flash drives), refer
to the supplied Media List document or the
Media List file (Media_List.pdf) on the CD-
ROM (Software & Manuals for Digital
Signage Player).
26
Preparing the Memory / Inserting an SDHC Memory Card
Inserting an SDHC
Memory Card
1
Remove the slot cover fastening screw
with a Phillips screwdriver, and open
the slot cover.
2
Insert the SDHC Memory Card into
the memory card slot.
Insert the card completely into the
slot, aliging the label facing down.
Note
Take care to insert the SDHC Memory
Card with correct orientation, as shown in
the illustration.
3
Replace the slot cover and tighten the
fastening screw with a Phillips
screwdriver.