S+S Regeltechnik RCO2-W Notice D'instruction page 11

G
®
AERASGARD RCO2 - W ⁄ RLQ - CO2 - W ⁄ RFTM - LQ - CO2 - W ⁄ RTM - CO2 - SD
TECHNICAL DATA
Ambient temperature:
Permitted humidity:
Warm up time:
Response time:
Electrical connection:
Housing:
Dimensions:
Installation:
Protection class:
Protection type:
Standards:
Optional:
®
AERASGARD RTM - CO2 - SD
®
AERASGARD RCO2 - W
®
AERASGARD RLQ - CO2 - W
AERASGARD ® RFTM - CO2 - W
®
AERASGARD RFTM - LQ - CO2 - W Multifunctional room sensor
Type ⁄ WG02
RTM - CO2 - SD
R T M - C O 2 - S D - U
RCO2 - W
R C O 2 -W
R C O 2 -W LCD
RLQ - CO2 - W
R L Q - C O 2 -W
R L Q - C O 2 -W LCD
RFTM - CO2 - W
R F T M - C O 2 -W
R F T M - C O 2 -W LCD
RFTM - LQ - CO2 - W
R F T M - L Q - C O 2 -W
R F T M - L Q - C O 2 -W LCD
Outputs:
Equipment:
Note:
0...+ 50 °C
0...95 % r. H. (non-precipitating air)
approx. 1 hour
< 2 minutes
0.14 - 1.5 mm 2 , via screw terminals
plastic, material ABS, colour pure white (similar to RAL 9010),
stainless steel V2A (1.4301) housing optional
98 x 98 x 33 mm (Baldur 2)
wall mounting or on in-wall flush box, Ø 55 mm, base with 4 holes, for attachment
to vertically or horizontally installed in-wall flush boxes for rear cable entry,
with predetermined breaking point for cable entry from top ⁄ bottom in case of plain on-wall installation
III (according to EN 60 730)
IP 30 (according to EN 60 529)
CE conformity, electromagnetic compatibility according to EN 61 326,
EMC Directive 2014 ⁄ 30 ⁄ EU, Low Voltage Directive 2014 ⁄ 35 ⁄ EU
display with illumination, two line, cutout approx. 36 x 15 mm (W x H),
for displaying actual humidity, actual temperature, air quality and the actual CO2 content
Room temperature and CO2 sensor, Standard
Room CO2 sensor, Premium
Room air quality (VOC) and CO2 sensor, Premium
Multifunctional room sensor
for humidity, temperature and CO2 content, Deluxe
for humidity, temperature, CO2 content and air quality (VOC), Deluxe
Measuring Range
Humidity Temperature
– 0...+50 °C
– –
– –
– –
– –
0...100 % r.H. 0...+50 °C
0...100 % r.H. 0...+50 °C
0...100 % r.H. 0...+50 °C
0...100 % r.H. 0...+50 °C
0 -10 V or 4...20 mA (selectable via DIP switches, selected variant applies for all outputs) –
Standard room sensor RTM - CO2 - SD with fixed output 0 -10 V!
W = changeover contact – Standard room sensor RTM - CO2 - SD without changeover contact !
This unit must not be used as safety-relevant device!
CO2 VOC
(fixed)
0...2000 ppm –
(switchable)
0...2000 ⁄ 5000 ppm –
0...2000 ⁄ 5000 ppm –
(switchable)
0...2000 ⁄ 5000 ppm 0...100 %
0...2000 ⁄ 5000 ppm 0...100 %
(switchable)
0...2000 ⁄ 5000 ppm –
0...2000 ⁄ 5000 ppm –
(switchable)
0...2000 ⁄ 5000 ppm 0...100 %
0...2000 ⁄ 5000 ppm 0...100 %
11
Equipment Item No.
Display (Baldur 2)
– 1501-61B2-1001-200
W 1501-61A 0- 7301- 200
W ■ 1501-61B0-7321-200
W 1501-61B1-7301-500
W ■ 1501-61B1-7321-500
W 1501-61B6-7301-200
W ■ 1501-61B6-7321-200
W 1501-61B8-7301-500
W ■ 1501-61B8-7321-500
Rev. 2021 - V31
(continued)