PROPAIN TRICKSHOT Instructions De Montage page 41

// USER MANUAL
COMPONENT TASK
Tires / sealing fluid Remove the tires and check them for damage and embedded foreign objects. At
the same time check the tubeless rim tape, see above.
Replace or refill sealing fluid if necessary. Remove dried sealing fluid from the
tires.
We recommend 30 ml sealing fluid per tire.
Gears / drive system Check wear of the chain with a chain wear gauge.
→ The chain must be replaced when the maximum permissible elongation
is measured with the chain wear gauge.
The chainring and the sprocket should also be replaced when replacing the
second chain.
Check the tension of the chain
*h = operating hours For intervals with km- and h-intervals, the event that occurs first applies.
INTERVAL
3 months
for the first time after 1000 km, then regularly
4 weeks, after each disassembly of the rear wheel