PROPAIN TRICKSHOT Instructions De Montage page 39

// USER MANUAL
8.1 SERVICING THE COMPONENTS
In theory, you can carry out all service works yourself. If there is any doubt about your own abilities or if you lack special tools, the work must be carried out by PROPAIN or by a qualified bicycle mechanic.
COMPONENT TASK
Complete bike Check tightening torques of all screws.
Torque values, see „8.3 Torques" on page 41
Frame Visual inspection of the frame for damage such as cracks and deformations,
discolouration and chafing caused by the cable housing or brake hoses.
Fork Visual inspection for damage such as cracks and deformations as well as discoloration.
Small service
Full service
Headset Disassemble, clean, grease and reassemble all parts of the headset.
Replace poorly running or corroded bearings.
Seatpost Disassemble, clean the seat post and seat tube of the frame and assemble it without
using lubricants.
Check the tightening torque. Torque of the seat post clamp and saddle clamp, see „8.3
Torques" on page 41
INTERVAL
for the first time after
100 to 300 km
or 5 to 15 h*
then every
1500 km or 75 h*
3 months
3 months
50 h / 3 months or according to manufacturer' s specifications
200 h / annually or according to manufacturer' s specifications
6 months
3 months