Adjusting The Cooling Spray - Dentsply Sirona Midwest Stylus Plus Notice D'utilisation

Operating instructions Midwest Stylus Plus / Midwest Tradition
A
67 27 148 D3673.201.09.01.02
5.4

Adjusting the cooling spray

➢ Adjust the flow rate of the cooling water using the control ring
(A) (> 50 ml/min).
Tip: You can measure the amount of cooling water with a
measuring cup and watch.
Water flow rate
Quick coupling F (Dentsply Sirona): The maximum water flow is set
when the control ring clicks into place.
Multiflex LUX quick coupling (KaVo): The maximum water flow is
set when the two markings face each other.
Roto Quick (W&H) quick coupling: The minimum water flow is set
when the red line and the red dot are facing each other.
Turn the control ring to the left or right for the maximum water flow.
5 Operation
39