TFA 60.5015 Mode D'emploi page 14

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
TFA_No. 60.5015_Anleitung
17.09.2019
Projection Alarm Clock Radio with USB charging function
9.2.1 Manual light mode
• By default, the automatic dimming function is disabled (OFF).
• In this mode, you can adjust the brightness in 3 levels or switch it off. The device is equipped with a
backlight in 2 levels (LOW/HIGH) which is also visible in bright ambient light and a night backlight which
enables the user to read the display in the dark.
• Press the SNOOZE/DIMMER button briefly. The sequence is shown as follow: LOW (default) - HIGH - OFF -
night light).
9.2.2 Automatic dimming mode
• Press and hold the SNOOZE/DIMMER button to activate the automatic dimming mode. AU appears on the
display.
• In this mode, the low display illumination is activated and the nightlight turns on automatically as soon
as the light sensor registers darkness. Manual setting is not possible.
• Press and hold the SNOOZE/DIMMER button again to deactivate the automatic dimming mode. OFF
appears on the display.
• The display automatically switches back to the current time display.
10. Charging function
• Plug your charging USB cable into the USB port on the alarm clock and connect the other end to your
mobile device. Make sure that the USB charging function is suitable for your mobile device (charging
current max. 1A).
26
16:06 Uhr
Seite 14
Projection Alarm Clock Radio with USB charging function
• Do not apply excessive force when connecting the USB cable. The USB plug fits only one way into the
USB port.
11. Care and maintenance
• Clean the device with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the battery if you do not use the device for a long period of time.
• Keep the device in a dry place.
12. Troubleshooting
Problem
Solution
➜ Connect the device to the power adapter
No display
➜ Set clock (see 7.1)
Incorrect indication
➜ Remove the device from the mains, remove the battery and restart after
3 seconds
➜ Press ▲ button (switch off the radio if necessary)
No projection
➜ Set the brightness with the SNOOZE/DIMMER button (see 9.2)
No backlight
(switch off the radio if necessary)
If your device fails to work despite these measures, contact the retailer where you purchased the product.
27

Publicité

Table des Matières
loading

Table des Matières