Yamaha WARRIOR YFM350XP 2001 Manuel Du Propriétaire page 262

1. Oil filter cover
3. Oil filter
1. Couvercle du filtre à huile
3. Filtre à huile
1. Tapa del filtro de aceite
3. Filtro de aceite
2. Bolt (× 3)
4. O-ring
2. Boulon (× 3)
4. Joint torique
2. Perno (× 3)
4. Junta tórica
5. Remove the oil filter cover by removing the
bolts and then remove the oil filter element.
6. Clean the oil strainer and oil filter element
with solvent.
7. Check the O-ring for damage and replace it if
damaged.
8. Install the oil filter element, and O-ring.
9. Install the oil filter cover by installing the bolts.
10. Install the oil strainer, compression spring
and drain bolt. Tighten the drain bolt and oil
filter cover bolts to the specified torques.
CAUTION:
_
Before installing the drain bolt, be sure to in-
stall the O-ring, compression spring and oil
strainer.
_
Tightening torques:
Drain bolt (engine):
32 Nm (3.2 m·kgf)
Filter cover bolt:
10 Nm (1.0 m·kgf)
11. Fill the engine with oil, and then install the
dipstick.
8-19