Part Description - Birchmeier RPD 15 PB1 Mode D'emploi

2. Part description

Filling cap
The membrane ventilates the air inside the spray tank, thereby preventing the contraction of the tank and
ensuring permanent suction of the spray mixture.
The O-ring prevents spillage of the spray mixture.
Filling filter
Always filter the spray agent through the filling filter into the tank. This protects the pump from foreign object
damage.
Spray tube support
The spray tube can be placed in the nozzle mount underneath, and clamped above in the gap between the
retaining ring to prevent the nozzle from contamination.
Spray tank
Robust, ergonomical plastic container with a 15 litre (4 US gallons) capacity.
Adjustable carrying belt
To shorten the shoulder straps, pull on the protruding straps of the belt, and to lengthen, move the buckles
up.
Click belt
Allows you to easily put on and take off the appliance. On one side fasten the belt, put the appliance on, and
comfortably click together with the second buckle.
Hose
Its length of 1.3 m (4.26 ft) enables maximum freedom of movement.
Triggers
RPD 15 PB1 Light plastic valve with attached spray tube connection
RPD 15 PB2 Robust plastic valve with screwed spray tube.
Accessory range see page 46 and www.birchmeier.com)
Spray tube
RPD 15 PB1 Straight 40 cm (1.31 ft) long stainless steel spray tube.
RPD 15 PB2 Curved 50 cm (1.31 ft) long stainless steel spray tube.
You can find more spray tubes in the fittings section on page 46, and on www.birchmeier.com
Plastic/stainless steel adjustable nozzle
RPD 15 PB1 The spray pattern and flow can be adjusted by turning the nozzle head in the following ways.
Spray sparingly (Close nozzle), misty (Open nozzle, ½ a turn) and for a jet stream (Open nozzle, turn 3
times).
Fanjet nozzle
RPD 15 PB2 Rotatable plastic nozzle with a spray angle of 80°.
For flow rates, please refer to the table on page 20.
Pump lever
Integrating a pump and an air vessel into the pump lever results in an easy and comfortable pump drive, with
no need for costly power transmission.
The hose outlet at the front of the lever prevents the hose from getting caught up in branches unintentionally.
The spray tube in use can be easily locked into the additional spray tube support on top of the pump lever
leaving both hands free again.
Pump-lever joint
With a few simple steps, the pump can conveniently shift between the working and parking position using the
special latching function. The pump can be operated in both positions making it easy to clean. The appliance
can be stored compactly in the parking position.
Furthermore, the lever can be reassembled for right-handed operation with little effort, making it possible for
left and right-handed users to work comfortably (delivery package comes pre-assembled for left-handed
operation).
Reassembly instructions for right-handed operation, see pages 18+19.
- 16 -