Bushnell 18-0832 Manuel D'instructions page 13

OPERATION GUIDE - Play Back on Television
Operating Procedure Picture Description
1. Connect to the TV
2. Open terminal cover of the device and
connect video cable to AV out port.
3. Connect the other end of video cable
to the video in port on the TV
4. Connect to the AC adaptor
(or battery)
5. Press the Power button
6. Press the TV power
22
Disconnect:
1. Make sure the camera
Binocular Action
Make sure that the power of TV
2. Remove the video cable.
and camera are turned off.
1. Press the Power button
2. If the battery capacity goes low,
While playing images on the TV,
the AC adaptor can be powered by
any household power outlet to 3. If the batteries go dead, the battery
support the device.
power is turned off.
OPERATION GUIDE - Low Battery Status
the battery symbol on the screen
will flash, a warning beep will be
sent out and LED will flash.
symbol will appear on the screen and the
device will send out a warning beep.
Please recharge the battery immediately.
23