UHI/UHO Series
4.
Bosch Security Systems, Inc.
Figure 5.3 Spacers for mounting zoom lens and camera
Mounting fixed lens cameras in all housings:
–
Attach the lens to the camera.
–
Combine the 4 mm and the 9 mm spacers provided to
mount the camera to the optional camera tray type A
(use different combinations of the spacers to ensure
that the camera lens is in the middle of the window).
Use the 1/4-20 x 5/8 in screw and large flat washer to
secure the camera and spacer to the camera tray, as
shown in Figure 5.3.
–
Slide the camera/lens tray in under the slot near the
hinge side of the housing, as shown in Figure 5.5.
Slide the entire assembly forward approximately
5 mm (0.2 in) from the front of the window. Install
screws into the appropriate holes.
Installation Manual
Installation | en
F.01U.167.418 | 3.0 | 2010.04
61