Bosch UHI Série Manuel D'utilisation page 72

72 en | UHO-HBPS-10, -50, and UHO-HPS-50
2.
3.
4.
F.01U.167.418 | 3.0 | 2010.04
Insert the power cord through the back shell assembly and
strain relief. See Figure 6.1).
Figure 6.1 Mating connector 4-pin assembly
1 230 VAC ONLY! Female clamping ring
2 24 VAC ONLY! Male clamping ring
3 Internal strain relief
4 Sealing gasket
5 Metal washer
6 Cable nut
The terminal block provided on these units accepts wire
ranging from 0.5 mm
When using larger wire sizes, splice to a smaller size wire
at the terminal block end.
Connect the power input cable to the screw terminals on
the provided mating connector. See Figure 6.1 and
Table 6.1.
Pin Function
1 AC neutral
2 AC live
3 No Connection
4 Ground
Table 6.1 4-pin wiring connections
Installation Manual
2 2
to 2.5 mm (20 AWG to 14 AWG).
Harness wire color
Blue
Brown
Do not use
Green/yellow
UHI/UHO Series
Bosch Security Systems, Inc.