Restart - Medion LIFE P89638 Mode D'emploi

Maintenance
23.2.5. Status
Current Firmware Version
This displays the current firmware version.
Periodically Check for Latest Firmware automatically
Set this entry to "ON" so that the NAS server will regularly search for firmware
updates. When logging in to the NAS server, you will receive a message if a
new firmware version is available.
Manually Firmware Upgrade
Firmware File
Here, you can specify the storage location for the firmware.
Browse
Click on this entry to search for the firmware file on the computer.
Upload
Click on this entry to upload the new firmware version. The NAS server will
restart automatically after the update. Wait until the restart has ended before
you log in to the NAS server again.
Reset
Click on this entry to reset the file selection.
Check for Latest Firmware
Here you can manually check if new firmware is available online.
Last check was on
This displays when the NAS server last searched for new firmware.
Check Now
Click on this entry to immediately start the online search for new firmware.

23.3. Restart

In this window, click on "Restart" to restart the NAS server. The NAS server
executes a software restart that is faster than if you switch off the NAS server
and switch if back on again. Before the restart, make sure there are no users
logged in to the NAS server and that no data is being exchanged with the
NAS server.
Confirm the restart with "Yes" or click on "No" to cancel the restart.
322 of 344