Medion LIFE P89638 Mode D'emploi page 293

Application
Backup Files to be Replaced
This function is only available if you did not specify in the upper area that a
new folder is to be created for every copy procedure.
If you select the function "Backup Files to be Replaced", the files
to be replaced will be backed up during every copy procedure.
Backup Target
Specify a storage location on the NAS server to which the backup files will be
saved during copying.
NOTE!
The NAS server does not create a new folder to save backup files.
We therefore recommend creating a separate folder (e.g. "Back-
up") for this.
Sync Settings
NAS Sync Target
Select the share on the NAS server where the files will be stored when using
the synchronisation function of the OTC button.
USB Volume
This displays the partition of the USB data medium that was last connected
to the front USB port. If the USB data medium contains several partitions,
choose the partition where the files for synchronisation will be stored.
Sync Direction
Select USB -> NAS to copy the files from the USB data carrier to the NAS
server during synchronisation, or select NAS -> USB to copy the files from the
NAS server to the above specified partition of the USB data medium during
synchronisation.
Select NAS <-> USB so that the files are synchronised on both data
mediums: the NAS server and the USB partition.
292 of 344