Copy/Synchronize Data With The Otc Button - Medion LIFE P89638 Mode D'emploi

operating system.
10. Copy/synchronize data with the
OTC button
Connect a USB data medium that you will use for copying/synchronizing
data (between the NAS server and the USB data medium) to the USB port on
the front of the NAS server.
PLEASE NOTE!
You can set the actions that are performed with the OTC button
at any time subsequently via the Web configurator (See "21.8.
OTC Button" on page 291). The actions described in the
following are preset on delivery.
 Wait until the OTC indicator glows orange and the NAS server has
detected the USB data medium.
You can now carry out the following functions with the OTC button:
 Briefly press the OTC button once to copy the data directly from the USB
data medium to the directory /public/[DATE]_[TIME] on the NAS server.
During the copying procedure the OTC indicator flashes orange.
As soon as the copying procedure is completed, you will hear two longer
beeps.
If you hear two short beeps, then there is not enough disk space to
complete the copying procedure. In this case, you need to make sufficient
disk space on the NAS server.
 Hold down the OTC button for about 3 seconds until you hear a beep.
Synchronization between the NAS server and USB data medium is
performed. To do this, you need to have set the synchronization in the
"OTC button" menu first.
During synchronization the OTC indicator will flash orange.
When the procedure is completed, you will hear two longer beeps.
If you hear two short beeps, then there is not enough disk space to
complete synchronization. In this case, you need to make sufficient disk
space on the NAS server.

Copy/synchronize data with the OTC button

245 of 344