Medion LIFE P89638 Mode D'emploi page 287

Application
Cancel
Click here to exit the settings without saving.
21.5.3. BitTorrent Settings
The BitTorrent configuration can be set in this window.
Port Number
Enter a port number in the range from 2 to 65536 for BitTorrent downloads. A
port number higher than 1025 is recommended.
DHT
Select Enable or Disable to enable/disable Distributed Hash Table (DHT)
support on the NAS server. DHT provides a more efficient search function
during data search than other search methods.
Maximum Download Rate
Here you can limit the bandwidth for BitTorrent downloads to avoid
situations in which other Internet applications in the network do not have
sufficient download bandwidth.
Enter the value "0" to set no limit.
Maximum Upload Rate
Here you can limit the bandwidth for BitTorrent downloads to avoid
situations in which other Internet applications in the network do not have
sufficient upload bandwidth.
Enter the value "0" to set no limit.
If you do not enable any uploads (for example, at an upload rate of 1 KB/s),
you also cannot share any data with the BitTorrent community.
PLEASE NOTE!
The settings for the maximum download/upload rate do not
influence the data transfer between users that are logged in to
the NAS server via the network.
Maximum Number of Active Torrents
Specify here how many BitTorrent downloads you wish to permit at the same
time. You can specify a number from 1–5 here.
286 of 344