Initial Operation; Install The Supplied Software On The Computer - Medion LIFE P89638 Mode D'emploi

Initial operation

7. Initial operation
When you start up the device for the first time, you should make the
following settings via your computer:
7.1. Install the supplied software on the
computer
Before you can configure the NAS server via your computer, you need to
install the Medion NAS Tool included on the supplied software CD. This
program is used to recognise the NAS server on the network and stores its
IP address for future access. In addition, you can directly access the various
tools and configurations of the NAS server.
During installation you can also install the Memeo Instant Backup software.
7.1.1. Installing the Medion NAS Tool
 Insert the installation CD into the DVD/CD drive.
 The CD starts automatically.
 Follow the installation instructions.
7.1.2. Installing Memeo Instant Backup
Following completion of the Medion NAS Tool installation, tick the box next
to "Install Memeo Instant Backup" to subsequently start the installation of
Memeo Instant Backup.
 Follow the installation instructions.
If the CD does not start automatically, follow the steps below to install the
software:
 Double click on "Computer" ("My Computer" on older versions of
Windows).
 Move the mouse pointer to the DVD/CD drive.
 Right-click, then click on Open.
 Double click on "Autorun.exe".
 The Installation Assistant appears.
 Follow the installation instructions.
240 of 344