Setup Location; Never Carry Out Repairs Yourself - Medion LIFE P89638 Mode D'emploi

Safety Instructions

2.3. Setup location

• Setup and operate all components on a sturdy, level and non
vibrating surface to prevent the device from falling.
• Do not jolt or shake the device. This could damage the
sensitive electronic components.
• Make sure there are no direct heat sources (e.g. heaters) that
could affect the device.
• Do not place naked flames (e.g. lit candles) on or near the
device.
• Make sure that the ventilation slots are not covered to
guarantee adequate ventilation.
• Do not place any objects on the cables, as this could damage
them.
• Keep a minimum clearance of approx. 10 cm between
walls and the device or mains adapter. Ensure adequate
ventilation.
• Do not operate your device out of doors, as external
influences such as rain, snow, etc., could damage the device.
• Maintain a distance of at least one metre to high frequency
and magnetic sources of interference (television,
loudspeakers, mobile phones, etc.) to avoid malfunctions.
• Large changes in temperature or fluctuations in humidity
can cause moisture build up within the device due to
condensation, which can cause an electrical short circuit.

2.4. Never carry out repairs yourself

If the plug, cable or appliance is damaged, immediately unplug
the device from the mains.
Do not start up the device if the device or cable show visible
signs of damage, or if the device has fallen down.
WARNING!
Never try to open and/or repair the device yourself.
There is a risk of electric shock!
232 of 344