Applications - Shure PG ALTA Série Guide De L'utilisateur

Avoiding Pickup of Unwanted Sound Sources
Place the microphone so that unwanted sound sources, such as monitors and loudspeakers, are directly behind it.
To minimize feedback and ensure optimum rejection of unwanted sound, always test microphone placement before a
performance.

Applications

The following table provides a basic starting point for several instruments. Shure offers additional educational
publications on microphone placement and recording techniques. Visit www.shure.com for more information.
Application
Acoustic guitar
Drums
Amplifiers
Strings or horns
Full band
Auxiliary
percussion
(congas,
tambourine, etc.)
Tip: Close microphone placement results in a full sound due to the proximity effect. Placing the microphone farther
from the source results in more room ambience.
4
MONITOR
P.A. LOUDSPEAKER
Recommended Loudspeaker Locations for Cardioid Microphones
Distance from source
6-12 inches (15-30 cm)
3-6 feet (1-2 m)
1-6 inches (2-15 cm)
1-6 feet (30 cm - 2 m)
3-10 feet (1-3 m)
6-12 inches (15-30 cm)
Tips
Place near the sound hole for a full sound, or near the 12th fret for
a balanced, natural sound.
Place in front of the drum kit to capture more of the kick drum, or as
an overhead (above the kit, facing down) to capture more cymbals.
Consider using additional Shure microphones placed on individual
drums for more mixing flexibility and a thicker sound.
Aim towards the center of the speaker for a clear, aggressive
sound, or towards the edge of the speaker for a mellow sound.
For a single instrument, place the microphone close to the source.
For a horn or string section, arrange players at an equal distance
from the microphone.
Face the microphone towards the group, centered between
instruments.
Aim the microphone away from other instruments on stage for
better isolation.