Technical Specifications; Package Contents; Safety Instructions - Parkside PFDS 33 B4 Mode D'emploi

Introduction / Safety instructions
16 Handle
17 Welding nozzle (0.9 mm)
17b Welding nozzle (1.0 mm)
18 Flux-core wire spool (wire reel)
Ø 0.9 mm / 450 g
19
Chipping hammer with wire brush
20
Welding helmet after assembly, com-
posed of:
21
Dark welding lens
22
Shield body
23
Mounting clip
24
Protective glass catch
25 Roller holder
26 Wire outlet
27 Setting screw
28 Thrust roller unit
29
Feed roll (2x)
30
Feed roll holder
31
Cable assembly bracket
32
Torch neck
33
Storage compartment for welding nozzles
z Technical specifications
Mains connection:
Welding current I :
2
Duty cycle X:
Open circuit voltage U
Greatest rated value
of the mains current:
Effective value of the
greatest rated current:
Welding wire reel max.:
Welding wire diameter
max.:
Fuse:
Weight:
30 GB/NI/IE
230 V~ / 50 Hz
(alternating
current)
40–90 A
10 % at 90 A
welding current,
60 % at 40 A
welding current
: 32 V
0
I 14 A
1 max.
I 4,4 A
1eff
approx. 1000 g
1.0 mm
16 A
13.65 kg
z Package contents
1 flux cored wire welder PFDS 33 B4
1 torch nozzle (pre-assembled)
4 welding nozzles
(1x 0.9 mm pre-assembled; 1x 0.8 mm;
1x 0.6 mm; 1x 1.0 mm)
1 chipping hammer with wire brush
1 flux-core wire Ø 0.9 mm / 450 g
1 welding helmet
1 carrying strap
1 set of operating instructions

Safety instructions

Please read the operating
instructions with care and observe
the notes described. Familiarise
yourself with the device, its
proper use and the safety notes
based on these operating instruc-
tions. The rating plate contains
all technical data of this welding
device; please learn about the
technical features of this device.
This device may be used by
„
children aged 16 years and
older, and by persons with
reduced physical, sensory or
mental capacities, or a lack of
experience and knowledge,
if they are supervised or have
been instructed in how to use
the device safely and under-
stand the dangers that may
arise when using it. Do not
allow children to play with the